Buy Your Stihl
Where They Fix
Your Stihl.

Ted's is a full-line Stihl dealer in Durango. We stock what people around here actually run, we order anything else in the catalog direct from Stihl, and we service every bit of it in the largest small-engine shop in the Four Corners. Buying the saw is the easy part — what happens in year three is why you buy it local.

1971Third-generation, family owned and operated
No. 1Largest small-engine repair shop in the Four Corners
Full-LineEvery Stihl category, in stock or ordered direct
Open LaterAn hour earlier, an hour later, a day longer than anyone in town

Anyone Can Sell You a Saw.

Plenty of places will hand you a Stihl and wave goodbye. When the carb gums up, the chain stretches, or a warranty question comes up, you're on your own — or you're boxing it up and shipping it somewhere. Ted's has been fixing small engines in Durango since 1971. We sharpen chains, stock the parts that actually fail, handle warranty work in-house, and tell you honestly when a repair isn't worth the money.

Full-Line Stihl Dealer

We carry the models Durango runs hardest, and we can order anything else in the Stihl lineup direct from Stihl.

We Service What We Sell

Warranty work, tune-ups, and repairs handled in our own shop — the largest small-engine shop in the Four Corners.

Parts On the Shelf

Chains, bars, filters, plugs, trimmer line, bar oil, and mix. Most of what fails is something we already have.

Open Earlier, Later, More Days

An hour earlier, an hour later, and a day longer than anyone else in town — because the job doesn't wait for banker's hours.

If It's Orange, We Can Get It.

We keep the models Durango leans on hardest right here on the floor — saws, trimmers, blowers, and the battery gear that's quietly taking over. Anything else in the Stihl catalog, we order direct and it ships to the store. Call and tell us what the job is. We'll tell you what's on the shelf today and what's a few days out.

Chainsaws

This is what Stihl is known for, and it's what we sell the most of. Firewood season, storm cleanup, or clearing a lot — the right saw is the one sized to the work, not the one with the biggest number on the cover. Tell us what you're cutting and we'll point you at it.

Gas

MS 162Light homeowner saw — limbing, small firewood, occasional storm work
MS 194 C-ECompact and light, easy-start, good for overhead and limbing
MS 271 Farm BossThe workhorse. Firewood, property maintenance, most of what people buy
MS 362 C-MProfessional saw with electronic fuel management — all-day cutting
MS 400 C-MPro-grade power-to-weight, magnesium build, serious felling
MS 500iThe fuel-injected one. Fastest-accelerating saw Stihl makes

Battery — AP Professional System

MSA 220 C-BPro battery saw, gas-comparable cutting speed, no fumes
MSA 300 C-OStihl's most powerful battery chainsaw
MSA 220 TTop-handle battery saw for arborists and tight overhead work

Battery — AK Homeowner System

MSA 60 C-BLight battery saw for yard cleanup and small limbing
MSA 80 C-BA step up in bar length and run time, same AK battery
Call to Check In-Stock Saws Not sure which battery system fits? See the battery lineup.

Weed Eaters & String Trimmers

Fence lines, ditches, and the strip of weeds along the driveway that comes back every August. The difference between a trimmer you tolerate and one you keep is usually shaft type and weight — and that's a conversation better had in person than on a spec sheet.

Gas

FS 131Professional-grade, straight shaft, handles brush and heavy growth
FS 111 RXLoop handle, rugged, built for rough ground
FS 91 RLoop-handle pro trimmer, lighter than the 111
FS 91Bike-handle version of the same platform
FS 65 RC-EHomeowner-friendly, easy start, light enough for long sessions

Battery — AK Homeowner System

FSA 57Light, quiet, good for small yards
FSA 60 RMore run time and cutting width than the 57
FSA 135 RTop of the AK trimmer line, closest to gas performance

Blowers

The cottonwoods make their decision sometime in late September, and they don't consult you first. Backpack blowers move volume when you've got real acreage. Handhelds handle a driveway and a deck. Battery models do it without waking the neighborhood — worth considering if your cleanup happens early on a Saturday.

Stihl BR 800 C-E Magnum backpack blower in use clearing fall leaves

Backpack — Gas

BR 800 C-E MagnumStihl's most powerful backpack blower. Acreage, wet leaves, snow
BR 200Lighter backpack, easier on the back for smaller properties

Handheld — Gas

BG 50Light, simple, one-hand comfortable for driveways and decks
BG 56 C-EMore power, easy-start, still handheld

Battery — AK Homeowner System

BGA 86Strongest AK blower, real volume without the noise
BGA 57Mid-range battery blower, good balance of run time and power
BGA 50Light homeowner battery blower for decks, walks, and small yards
BGA 30Lightest of the line, grab-and-go for quick cleanups

One Battery. A Dozen Tools.

Stihl runs two battery systems, and knowing which one you're in matters more than any single tool. The AK system is built for homeowners — lighter, quieter, and the same battery drops into the saw, the trimmer, the blower, and the pruner. The AP system is the professional line, built for people who run equipment all day and need gas-comparable output.

Buy into one and every tool after that costs less, because you're only buying the tool.

AK Homeowner System

Lighter, quieter, built for weekend jobs — and every tool below shares the same battery.

  • MSA 60 C-B · MSA 80 C-B — Chainsaws
  • FSA 57 · FSA 60 R · FSA 135 R — Trimmers
  • BGA 86 · BGA 57 · BGA 50 · BGA 30 — Blowers
  • GTA 26 — Garden pruner, the little one everybody ends up loving
  • HSA 60 — Hedge trimmer

AP Professional System

Built for people who run equipment all day and need gas-comparable output, no fumes.

  • MSA 220 C-B — Chainsaw, gas-comparable cutting speed
  • MSA 300 C-O — Stihl's most powerful battery chainsaw
  • MSA 220 T — Top-handle saw for arborists and tight overhead work

Lawn Mowers

Self-propelled matters more in Durango than most places — a lot of these yards aren't flat. We assemble, fuel, and test-run every mower before it leaves, and we service it here when the season's over.

Models

RM 655 YSSelf-propelled, variable speed, built for real yards
RM 655 VSSame platform, different drive configuration
RM 453 PPush mower, straightforward and durable for smaller lots

Pole Saws

For the limb that's just out of reach and definitely not worth a ladder. Reach beats power on most of these jobs, and standing on solid ground beats both.

HT 135Professional telescoping pole pruner, adjustable reach

Hedge Trimmers

Quiet enough to use on a Sunday morning without becoming the story on Nextdoor.

HSA 60Battery hedge trimmer, AK system — shares batteries with the saw and blower

Cut-Off Saws

Concrete, asphalt, rebar, pipe. If you're cutting hard material on a jobsite, this is the category — and if you'd rather rent than own for a single job, we do that too.

Models

TS 710iFuel-injected, largest cutting depth in the line
TS 500iFuel-injected, fast starting, professional daily-driver
TS 420The proven standard, straightforward and durable

Pressure Washers

Winter leaves a film on everything — the deck, the siding, the truck that hauled firewood all season. A pressure washer turns a weekend of scrubbing into an afternoon, and turns "we should probably repaint that" into "turns out it was just dirty."

RB 800High-output pressure washer built for heavy cleaning and big surfaces

Water Pumps

For when the crawlspace has opinions about spring runoff.

WP 300Transfer pump for water removal and general transfer work

Parts, Service, and Everything Else in the Catalog.

Buying the machine is one conversation. Keeping it running is the one that actually matters — and it's the one Ted's has been having since 1971.

Parts for All of It

Chains, bars, sprockets, filters, plugs, trimmer line, bar oil, and mix — the things that wear out, in stock, on the shelf. If it's a part we don't stock, we order it. You don't have to guess at a part number over the phone either. Bring the machine, or bring the broken piece.

Call About Parts

We Fix What We Sell. And Most of What We Don't

The largest small-engine shop in the Four Corners, and the widest set of vendors we can get parts for. Warranty work on Stihl handled in-house — no boxing it up and shipping it off. Chain sharpening with a short turnaround. Pre-season tune-ups before the season, not during it.

See Service & Repair

The Rest of the Kit

Chaps, helmets, eye and ear protection, gloves, wedges, files and sharpeners, fuel cans, bar oil, and pre-mixed fuel that won't gum up your carb over the winter. If you're buying a saw and you don't own chaps, we're going to bring it up — because we've seen what the alternative looks like.

Call About Accessories

Not on the Floor? Still Yours

We stock what Durango uses most, which is a lot of the catalog but not all of it. Anything else in the Stihl lineup we order direct from Stihl and have shipped to the store. Same warranty, same service, same people when you need something fixed.

Call to Special Order

Questions People Actually Ask

Do you service Stihl equipment I bought somewhere else?

Usually yes. Bring it in and we'll tell you what's possible, what it costs, and whether it's worth doing. We'd rather be straight with you than take on a repair that doesn't make sense.

Do you handle Stihl warranty work?

Yes, in-house. Nothing gets boxed up and shipped away.

How fast can you sharpen a chain?

Short turnaround. Chain sharpening is one of the most common things we do — call ahead and we'll tell you what today looks like.

What if you don't have the model I want?

We order it direct from Stihl. Call with the model number, or describe the job and we'll help you land on the right machine.

Should I go battery or gas?

Depends on the work. Battery has gotten genuinely good, and for most homeowner jobs it's quieter, lighter, and starts every time. If you're running equipment all day or cutting big wood, gas still wins. Come in and we'll be honest about which side you're on.

Do you sell parts if I do my own repairs?

Yes. Chains, bars, filters, plugs, line, and more on the shelf. We'll help you find the right part number if you're not sure.

The Job Doesn't Wait for Shipping.

Come see what's on the floor, or call and we'll tell you straight — what's in stock, what we can order, and what's actually right for the work you're doing. That's been the arrangement here since 1971.

Get the Right Machine, Ready to Run.

Call and tell us what the job is. We'll tell you what's in stock, what's a few days out, and which model actually fits — no upsell, no guesswork.

Call to Check Availability and Get Directions